drilled$544308$ - traducción al griego
Diclib.com
Diccionario ChatGPT
Ingrese una palabra o frase en cualquier idioma 👆
Idioma:     

Traducción y análisis de palabras por inteligencia artificial ChatGPT

En esta página puede obtener un análisis detallado de una palabra o frase, producido utilizando la mejor tecnología de inteligencia artificial hasta la fecha:

  • cómo se usa la palabra
  • frecuencia de uso
  • se utiliza con más frecuencia en el habla oral o escrita
  • opciones de traducción
  • ejemplos de uso (varias frases con traducción)
  • etimología

drilled$544308$ - traducción al griego

CUTTING PROCESS THAT USES A DRILL BIT TO CUT A HOLE OF CIRCULAR CROSS-SECTION IN SOLID MATERIALS
Hot water drill; Drilling and threading; Trepanning (manufacturing); Peck drilling; Trepanning (drilling); Drilled
  • High-speed steel twist bit drilling into aluminium with methylated spirits lubricant
  • Titanium chips – conventional drilling vs vibration drilling
  • Magnetic Drilling Machine ''(manufactured by BDS Maschinen GmbH, Germany)''
  • The orbital drilling principle
  • Titanium drilling
  • Vibration drilling of an aluminum-CFRP multi-material stack with MITIS technology
  • Blast hole several meters long, drilled in granite
  • cross slide]].

drilled      
adj. διάτρητος

Definición

drilling

Wikipedia

Drilling

Drilling is a cutting process where a drill bit is spun to cut a hole of circular cross-section in solid materials. The drill bit is usually a rotary cutting tool, often multi-point. The bit is pressed against the work-piece and rotated at rates from hundreds to thousands of revolutions per minute. This forces the cutting edge against the work-piece, cutting off chips (swarf) from the hole as it is drilled.

In rock drilling, the hole is usually not made through a circular cutting motion, though the bit is usually rotated. Instead, the hole is usually made by hammering a drill bit into the hole with quickly repeated short movements. The hammering action can be performed from outside the hole (top-hammer drill) or within the hole (down-the-hole drill, DTH). Drills used for horizontal drilling are called drifter drills.

In rare cases, specially-shaped bits are used to cut holes of non-circular cross-section; a square cross-section is possible.